Part Number: ETI0014-1110
|
DRIVE BAYS | |
Drive bays type: | (8) half height height or slim height devices |
Drive bay mounting: | Each full bay holds half height or shuttle |
Removable media: | Front bays can have fixed or removable media |
DRIVE BAY POWER | |
Drive bay power: | Both +5 and +12 VDC to each half height bay |
Drive power connector: | Both standard and mini power connectors |
Drive power control: | Keyed ON/OFF switch per drive shuttle bay |
Drive status indicators: | (1) Power, (1) Activity LED per shuttle bay |
DRIVE I/O INTERFACE | |
I/O Ports: | Four chassis input/output (I/O) panels standard |
I/O Connectors: | Selection of 50 and 68 terminal connectors for SCSI-2 and SCSI-3, Fast, Fast/Wide and LVD Other I/O interfaces available upon request |
SCSI address selection: | Fixed at device by jumper setting standard, SCSI ID selector switches |
Single-ended/Differential: | Can be mixed w/ optional bi-directional converter |
AC INPUT | |
Input voltage selection: | 100-240 VAC, 46-70 Hz autoranging, DC optional |
Input transient suppression: | Complies with IEEE 587 and UL 1449 |
Input control/protection: | Guarded, double pole, front mounted switch Front mounted fuses, 1 per line Internal AC input fuse on each supply x 4 |
Input status indicator: | AC Power On indicator, green neon |
Input power connection: | IEC320-15P with cable restraint, others optional |
INTERNAL DC SUPPLIES | |
Output rating: each | Redundant 65 watts supplies x 4 |
Output voltage:+5 VDC | +5 VDC, ± 5% tolerance, 50 mV ripple |
Output current:+5 VDC | 3.5 A max., 0.5 A min., 8 A peak, each supply |
Output voltage regulation:+5 VDC | ± 1.0% static, ± 5.0% dynamic of nominal |
Output voltage:+12 VDC | +12 VDC, ± 10%, 100 mV ripple |
Output current:+12 VDC | 4.0 A max., 0.5 A min., 8 A peak, each supply |
Output voltage regulation:+12 VDC | ± 2.0% static, ± 10% dynamic of nominal |
Output status indicator: | DC Power On, green LED, 1 per supply |
MECHANICAL | |
Overall Dimensions ( H x D x W ): | 8.75 (5U) x 18.3 x 19.0 in (222x465x483mm) |
Rack Slide Mount Patterns: | General Devices pattern, others optional |
Alternate Mounting Options: | Table, Wall, Floor, Portable, Horizontal/Vertical |
Shipping weight: | 25 lb. (11 kg) with lift handles front and rear |
Audible noise: | Less than 45 dB @ 5.0 ft., ANSI "A" scale |
Cooling type: | Dual, high capacity, positive pressure, forced air |
Cooling air direction: | Rear intake, exhaust to sides standard |
Air intake filter: | Washable filter media, various porosities |
ENVIRONMENTAL | |
Storage temperature: | -13° to 140° F ambient (-25° to 60° C) |
Operating temperature: | -4° to 122° F ambient (-20° to 50° C ) |
Operating humidity: | 0 to 95% relative humidity (non-condensing) |
Operating elevation: | Up to 10,000 ft (3,048 m), higher optionally |
STANDARDS | |
United States: | Meets to UL standard 1950 MIL STDs 167, 901, 810, 454 & 1399 |
Canada: | CSA requirements 1402C safety requirements |
EMI Protection: | EMI/RFI FCC, Class A, optional MIL STD 461 |
OPTIONAL ACCESSORIES | |
Alternate mounting kit, Custom configurations |
For information on ETI's rugged removable disk drive carriers, check out ETI0014-DE200 that are hot swappable, RAID compatible and withstand shock and vibration.
This page was last modified on:
May 04, 2008