Part Number: ETI0003-1070
Rugged Rackmount Power Distribution Unit
with 3 Phase Input / 15 Single Phase Outputs

PowerStationETI0003-1070 Rugged Rack Mount PDU
3 Phase, 20 Amp/Phase 115/200 VAC, 40-440 Hz Input
15 Output Circuits w/ Individual Circuit Breaker Control
All Breakers Rated for 100 G Shock
Individual Clocked MS Output Connectors

ETI0003-1070 Front and Rear View
ETI0003-1070 Standard Front and Rear Panel Layout 

The field proven PowerStation™ Power Distribution Unit (PDU) line is ideally suited for industrial and telecommunications applications requiring a rugged rack, vehicular or field deployable, high reliability, compact size and light weight design. The heavy-duty chassis occupies only 2U (3.5”) of rack space while controlling up to 7000 VA of power via fifteen (15) circuit breaker controls.  The rounded metal corners aid in safe handling. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration. All controls and protective devices are brought to the front panel. Further, all front panel devices are recessed with critical switches or breakers guarded to prevent damage or accidental operation. 

The three pole input breaker provides overload and short circuit protection for the whole unit. The PDU allows control of the individual output circuits. The optional Emergency Power Off (EPO) function can remotely open the input circuit breaker. Each load is controlled and protected by a 100 G shock rated circuit breakers avoiding accidental operation due to shock or vibration. An optional elapsed time hour meter is available to track the rack equipment operation for maintenance. 

The rear panel provides locking connectors for the input power and output power. The combination MS input connector and input EMI/RFI filter provides suppression of conducted EMI. The transient surge suppression helps further protect the connected equipment.

Overall, the PowerStation product line is uniquely qualified for critical shipboard, vehicle, airborne or land based systems combining advanced modular design features with highly reliable construction.

Technical Specifications:
P/N: ETI0003-1070

PDU input from rack: 120 VAC nominal, optional up to 600 VAC
INPUT MAIN connection: MS3102E32-17P, 4 pin locking
Input control/protection: Guarded 3 pole, 20 amp/phase circuit breaker
Input power indicator: Green neon lamp
PDU output voltage to loads: Same as input from rack
Output rating to loads: Limited to lesser of 15 amps/load or 60 amps total
Output circuits: 15 controlled outputs w/1 pole circuit breakers
LOADs (J1-J15) MS3102E16-10S, -10SW, -10SX, 3 pin locking
Dimensions ( H x D x W ): 3.5 (2U) x 15.0 x 19.0 in (89x381x483mm)
Rack Slide Mount Patterns: Slides or rear support mounting brackets
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Shipping weight: 20 lb. (9.1 kg) with lift handles front
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: Convection cooling
Storage temperature: -13° to 140° F ambient (-25° to 60° C )
Operating temperature: 32° to 122° F ambient (0° to 50° C ), higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Operating elevation: Up to 10,000 ft (3,048 m), higher optionally
United States: Meets UL-1778 standard,
MIL STDs 901, 167 & 1399 Shock/Vib/Electrical
Canada: CSA C22.2 No. 107 safety requirements
EMI Protection: EMI/RFI FCC, Class B, MIL STDs 461
  Dual Source Input, Emergency Power Off, EMI Insertion Loss Filters, Elapsed Time Meter, Auxiliary DC Power Supply, Transient Surge Suppression, Load Sequencing

This page was last modified on: May 04, 2008
The N5 is one of the most popular configurations for new programs!