FOR IMMEDIATE RELEASE
Energy Technologies Exhibits Latest Designs at Defense Supply Center Columbus Suppliers' Conference 2004
DSCC Suppliers' Conference 2004 to be held August 30 - September 1, 2004 in Columbus, OH.
- Mansfield, OH, June 4, 2004: Energy Technologies, Inc. (ETI) will be exhibiting it latest rugged products at the NDIA (National Defense Industrial Association) / DSCC (Defense Supply Center Columbus) Suppliers' Conference and exhibit show to be held August 30 - September 1, 2004 at the Hyatt Regency Columbus Convention Center.
Expanded PowerStation™ UPS Product Line to be featured.
Energy Technologies, Inc. (ETI), the Standard in rugged power conditioning, will be exhibiting its expanded PowerStation rugged UPS product line August 30 - September 1, 2004 at the Hyatt Regency Columbus Convention Center. These rugged multinational UPSs range in power output from 1 kVA to 6 kVA modules which is more than adequate to support the critical electronic computer and communications equipment in most applications. They are designed to accept commercial power or mobile generator power ranging from 85 to 270 VAC. Other units are available with inputs up to 690 VAC. The input frequency can range from 45 to 70 hertz, with up to 440 hertz optional. These voltages and frequencies cover all standard AC voltages worldwide. The UPS converts these inputs to standard 120 VAC, 60 hertz used by most electronic equipment manufactured in the USA. This allows the use of standard military equipment including commercial off the shelf (COTS) to be operated reliably anywhere in the world. Other output voltages with 50 or 60 hertz output frequency are also available. Besides converting the voltage and frequency, the ETI UPS eliminates all the voltage and frequency fluctuations, transients and distortions, providing only clean sinusoidal power to the crucial equipment.
Featured products will include:
- Several new 2000 VA UPS/PDU models for shallow depth rack applications like submarines
- New Remote Distribution Units ultra compact 1U high PDU located anywhere in the rack.
- New Remote Control Unit, ultra compact 1U high display and control for both UPS and PDU.
- The new Frequency Converter models in various power ranges with 50 thru 400 Hz outputs available.
- New Power Distribution Unit configurations including the ultra compact 1U high PDU.
- The new compact, Mil Spec Mass Storage Systems with hot swappable drive shuttles and redundant power.
- The new ultra redundant Mil Spec RAID systems in rugged and very compact form factors.
- The new light weight, frequency converter and UPS for medical life support applications aboard aircraft.
The 1000 through 24,000 VA models are already successfully deployed in military and industrial applications worldwide. For example, the ETI0001-N5 is the configuration of choice for most new Navy programs especially submarine applications. Now, the 4000 VA N5 provides all the features of the standard N5, but with twice the power in less than twice the space. As a result, it has already been selected for a new submarine program with increased power requirements. The Air Force has selected ETI's light weight, high isolation, full Mil Spec UPS/frequency converter to power mobile patient carts that can be used aboard aircraft, in ambulances and hospital locations alike. Ground support surveillance systems are now supported by ETI's modular DC UPS systems with hot swappable 6 hour battery backup.
Energy Technologies, Inc. provides highly reliable, yet cost effective product solutions for the rugged computer and power conditioning requirements of military, industrial, medical, and telecommunications sectors. ETI’s products are in use around the world including rugged rackmount PowerStation™ UPS, power distribution units, frequency converters, and battery systems; PersonalSource™ UPSs; PowerNet™ UPS software; TelecomPower™ telecommunications inverters, converters and rectifiers; and MissionCritical™ computer and drive expansion units. Each of these products are modular and may be modified to suit a particular application or integrated into a total solution.
For More Information Regarding ETI, Contact:
Energy Technologies, Inc.
219 Park Avenue East, Mansfield, OH 44902-1845
Tel: 419.522.4444
FAX: 419.522.4466
Internet:
sales@ruggedsystems.com
For More Information Regarding This Trade Show, Go To:
DSCC Suppliers' Conference and Exposition
For More Information Regarding the NDIA, Go To:
